MetroCluster Config Advisor 分区配置错误

适用于

• MetroCluster
• Config Advisor

问题

ConfigAdvisor 报告以下消息之一：

• Switch Fabric does not contain the correct number of switches, one switch may be down, fabric is segmented, or too many switches seen
• No FCVI zone in fabric for switches found
• FCVI port is part of more than one zone
• FCVI zones in fabric for switches does not contain all FCVI ports of the DrGroup
• FCVI zone in fabric for switches has one or more FCVI ports represented with their WWN
• FCVI zone in fabric for switches are not a QoS zone with priority 'high'.
• FCVI zone in fabric for switches does contain one or more non-FCVI ports.
• Storage zone in fabric for switches contain one or more ports that are not a Storage HBA and not a FibreBridge.
• Storage zone in fabric for switches are incorrect and contain too many storage initiator ports.
• Storage zone in fabric for switches are incorrect and contain not enough storage initiator ports.
• Storage zone in fabric for switches are incorrect and contain too many FibreBridge ports
• Storage zone in fabric for switches have one or more ports represented with their WWN.
• No Storage zone in fabric for switches found.
• Storage zoning configuration on Switch is not expected Storage zone.
• Traffic Isolation (TI) zone configuration found on switch, TI is not supported in this configuration.
• Storage zone in fabric for switches contain or more ports that are not a Storage initiator and not a target array port.
• Storage zone in fabric for switches are and contain too many target array ports
• Defined zone and effective zone do not match.
• Zone is defined and not member of a configuration
• Zone is defined but not active