跳转到主内容

MetroCluster 配置是否支持 ACP (备用控制路径)?

Views:
25
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

适用于

  • MetroCluster
  • Alternate Control Path(备用控制路径)(ACP)
  • ATTO FibreBridge

解答

MetroCluster 配置中是否支持 ACP ?

ACP 支持独立于 ATTO FibreBridge 使用或直接 SAS 连接配置

带外 ACP
  • 在任何 MetroCluster 配置中都不受支持
带内 ACP 
  • 支持条件 
    • 使用带有 ONTAP 9.2 和更高版本的 IOM 12 模块( DS460C )

    • 使用带有 ONTAP 9.1 和更高版本的 IOM 12 模块
  • 互操作性 
    • 如果是 IOM 12 和 IOM 6 的组合、则应禁用带内 ACP 。
    • IOM 6 模块不支持带内 ACP ,因此应禁用该模块。

其他信息

有关详细信息,请参见《 MetroCluster 安装和配置指南》。

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.