在Fabric MetroCluster中关闭灾难恢复镜像

最后更新
另存为PDF

Views:: 5

Visibility:: Public

Votes:: 0

Category:: metrocluster

Specialty:: metrocluster<a>2009954094</a>

Last Updated:

适用场景

ONTAP 9
光纤 MetroCluster

问题描述

MetroCluster系统中的灾难恢复镜像已关闭：

Cluster_A::> metrocluster interconnect show
               Mirror   Mirror
           Partner Admin   Oper
 Node Partner Name Type   Status   Status  Adapter Type   Status
 ---- ------------ ------- -------- ------- ------- ------ ------
 ClusterA-01
    ClusterB-01
           DR    enabled  online
                       fcvi_device_0
                           FC-VI  Up
                       fcvi_device_1
                           FC-VI  Down
 2 entries were displayed.

节点上的FCVI端口已关闭：

slot 2: FCVI Host Adapter 2b (QLogic 8324(2672) rev. 2, unknown) Physical link: DOWN FC Node Name: 21:00:XX:XX:XX:XX:XX:XX Firmware rev: 8.01.141

连接到FCVI端口的交换机端口没有指示灯：

switchshow : switchName: MCC-SW4 switchType: 181.0 switchState: Online

Index Port Address Media Speed State Proto ================================================== 0 0 080000 id 16G No_Light FC

连接到交换机端口的SFP没有接收电源：

MCC-SW4:admin> sfp show 0 ============= Port 0: ============= Current: 7.496 mAmps Voltage: 3254.4 mVolts RX Power: -inf dBm (0.0 uW) TX Power: -1.4 dBm (732.5 uW)