跳转到主内容

由于 MTU 大小不匹配导致的 ClusterIfInErrorsWarn_Alert

Views:
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
metrocluster
Last Updated:

适用于

  • ONTAP 9
  • Cisco 交换机

问题描述

  • ClusterIfInErrorsWarn_Alert 已生成。

示例:

The percentage of inbound packet errors of switch interface "xxx(yyy)/Ethernet1/19" is above the warning threshold.

  • giants 计数器随着 Switch 上的 input error 计数器不断增加。

示例:

Ethernet1/19 is up
..
MTU 1500 bytes, BW 100000000 Kbit , DLY 10 usec
..
RX
47787317 unicast packets 392683 multicast packets 402426 broadcast packets
48770167 input packets 12405023580 bytes
210742 jumbo packets 0 storm suppression bytes
0 runts 187741 giants 0 CRC 0 no buffer
187740 input error 0 short frame 0 overrun 0 underrun 0 ignored
0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.