在 MetroCluster FC 中更新后， Cisco 交换机固件不匹配

适用场景

• 光纤连接 MetroCluster
• Cisco 交换机

问题描述

• Active IQ的"风险"部分可能会报告以下警报：

Firmware upgrade of backend switches has not been correctly updated.
ONTAP and switch health monitoring do not list the same version of switch firmware.

• 升级Cisco后端交换机的固件后 sysconfig -a 、输出和ONTAP 运行状况监控之间可能会出现版本不匹配的情况：

ClusterA::> storage switch show -fields fw-version
switch-name          fw-version
-------------------- ----------
Cisco_10.10.10.1     8.4(2d)   
4 entries were displayed.

ClusterA::> node run -node * sysconfig -a
2 entries were acted on.
  
slot 1: FCVI Host Adapter 1a (QLogic 8324(2672) rev. 2, F-port)
      Physical link:     UP
      FC Node Name:     21:00:00:0e:1e:30:d3:ba
      Firmware rev:     8.01.141
      Serial No:       BFE1422K12502
      Host Port Id:     0x110000
      FC Packet size:    2048
      SFP Vendor:      FINISAR CORP.
      SFP Part Number:    FTLF8529P3BCV-QL
      SFP Serial Number:   XXXXXXX
      SFP Capabilities:   4, 8 or 16 Gbit
      SFP Wavelength:    850nm
      Link Data Rate:    16 Gbit
      Switch Port:      Sw-1:1-1
      Switch Vendor:     Cisco Systems, Inc.
      Switch Model:     DS-C9148S-K9
      Switch FW Version:  8.4(2a)