跳转到主内容

连接到Ciena布鲁克时、无法中继Broacade 16G ISL

Views:
16
Visibility:
Public
Votes:
0
Category:
not set
Specialty:
not set
Last Updated:

适用场景

  • MetroCluster
  • Ciena
  • Brocade
  • Broadcom

问题描述

  • 将Brocade 16G ISL连接到Ciena网络中继时、这些端口不会进行中继。
  • Brocade交换机上的switchshow 命令将显示其中一个ISL端口 联机、另一个ISL端口处于不同步状态:

Index Port Address  Media Speed   State       Proto
==================================================
40  40   062800   id    16G      Online      FC  LS G-Port  
 41  41   062900   id    16G      No_Sync     FC  LS Disabled

  • 您可能会看到类似以下内容的错误:

2024/08/17-09:23:19, [PORT-1010], 32248, FID 128, INFO, <Switch name>, Port (ID: 41) QoS is disabled.

2024/08/17-09:23:39, [MAPS-1003], 32249, FID 128, WARNING, <Switch name>, port41, U-Port 41, Condition=NON_E_F_PORTS(STATE_CHG/min>11), Current Value:[STATE_CHG, 22], RuleName=defNON_E_F_PORTSSTATE_CHG_11, Dashboard Category=Port Health.

2024/08/17-09:23:57, [MAPS-1003], 32250, FID 128, WARNING, <Switch name>, port41, U-Port 41, Condition=ALL_PORTS(LF/min>5), Current Value:[LF, 6], RuleName=defALL_PORTSLF_5, Dashboard Category=Port Health.

  • 您将看到端口已设置为FEC:

    Switchname:root> portcfgshow 41
    Area Number: 40
    Octet Speed Combo: 1(16G|8G|4G|2G)
    FC Speed Level: 16G
    AL_PA Offset 13: OFF
    Trunk Port ON
    Long Distance LS
    VC Link Init ON
    Desired Distance 65 Km
    Reserved Buffers 526
    Locked L_Port OFF
    Locked G_Port ON
    Disabled E_Port OFF
    Locked E_Port OFF
    ISL R_RDY Mode OFF
    RSCN Suppressed OFF
    Persistent Disable OFF
    LOS TOV mode 0(OFF)
    DWDM losync mode OFF
    NPIV capability ON
    QOS Port OFF
    Port Auto Disable: OFF
    Rate Limit OFF
    EX Port OFF
    Mirror Port OFF
    SIM Port OFF
    Credit Recovery ON
    F_Port Buffers OFF
    E_Port Credits OFF
    Fault Delay: 0(R_A_TOV)
    NPIV PP Limit: 126
    NPIV FLOGI Logout: OFF
    CSCTL mode: OFF
    TDZ mode: OFF
    Clean Address Bit: OFF
    D-Port mode: OFF
    D-Port over DWDM: OFF
    Compression: OFF
    Encryption: OFF
    10G/16G FEC: ON
    16G FEC via TTS: OFF
    8G Non-DFE: OFF(Auto)

 

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • 这篇文章对您有帮助吗?