跳转到主内容

网桥无连接带内

Views:
5
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

适用场景

  • ATTO 7500N FibreBridge
  • ATTO 7600N FibreBridge

问题描述

此网桥无法在带内访问,并且无法响应带内命令:
 
 mc1::> system health alert show Node: mc1-02 Resource: ATTO_2000001086a83308 Severity: Major Indication Time: Thu Aug 19 20:24:03 2021 Suppress: false Acknowledge: false Probable Cause: "ATTO_2000001086a83308" bridge is not reachable over management network. Possible Effect: Bridge "ATTO_2000001086a83308" cannot be monitored for alerts. Corrective Actions: 1) If the bridge is monitored by SNMP, verify that the node management LIF is up by using the "network interface show" command. Verify that the "ATTO_2000001086a83308" bridge is alive by using the "network ping" command. 2) If the bridge is monitored in-band, check the fabric cabling to the bridge, and then verify that the bridge is powered up. mc1::> storage bridge run-cli -name ATTO_2000001086a83308 -command "info" [Job 34738] Job succeeded: Bridge is currently unavailable. Wait a few minutes and then try the operation again.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.