手动添加集群交换机后、ONTAP 不会在CSHM中将版本源报告为CDP/ISDP
适用场景
- ONTAP 9
- 集群网络交换机
- 集群交换机运行状况监控(CSHM)
问题描述
- 手动添加后、集群交换机会在CSHM中将版本源报告为SNMP、而不是CDP/ISDP。
cluster1::> system cluster-switch create -device ClusterSwitchB -address 10.xx.xx.24 -snmp-version SNMPv2c -community-or-username cshm1! -model NX55596 -type cluster-network
cluster1::> system cluster-switch show
Switch Type Address Model
--------------------------- ------------------ ---------------- ---------------
ClusterSwitchB(XXXXXXXXXXX)
cluster-network 10.xx.xx.24 NX5596
Serial Number: XXXXXXXXXXX
Is Monitored: true
Reason: None
Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
7.3(7)N1(1b)
Version Source: SNMP
2 entries were displayed.
- 尽管删除了该条目、但不会使用CDP或ISDP自动发现这些交换机。
- 如果手动添加、则此交换机也可能显示为Unsupported Model (不支持的型号)：
Switch Type Address Model
--------------------------- ------------------ ---------------- ---------------
ClusterSwitchB cluster-network 10.xx.xx.24 OTHER
Serial Number: XXXXXXXXXXX
Is Monitored: true
Reason: Unsupported Model
Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
7.3(7)N1(1b)
Version Source: SNMP