收到MCC IP的SwitchIlIfDownWarn_Alert
适用场景
- MetroCluster IP
- Cisco交换机
- ISL 端口
问题描述
- 在EMS日志中接收以下警报
[Node01: cshmd: hm.alert.raised:alert]: Alert Id = SwitchIslIfDownWarn_Alert , Alerting Resource = MCCSwitch01(XXXXXXXXXXX)/Ethernet1/16 raised by monitor ethernet-switch- 生成运行状况警报
               Node: Node01
            Alert ID: SwitchIslIfDownWarn_Alert
            Resource: Ethernet1/16
            Severity: Major
     Indication Time: Fri Mar 21 00:40:36 2025
            Suppress: false
         Acknowledge: false
      Probable Cause: The cable attached to the ISL port
                     "MCCSwitch01(XXXXXXXXXXX)/Ethernet1/16" with the
                      description of "MetroCluster ISL Port native speed"
                      might be faulty. For the port-channel, please check
                      each individual link.
     Possible Effect: Inter- or Intra- cluster redundancy might be lost.
  Corrective Actions: 1) Check whether the cable is fully inserted into the interface port on both ends.
                      2) Reconnect the ISL port using another cable. After
                      reconnecting it, verify whether the link of the ISL
                      port is up by executing the commands per the switch
                      configuration guide or by checking whether the Link
                      status LED is on.- 交换机日志显示链路未连接的端口
--------------------------------------------------------------------------------
 Port   VRF          Status IP Address                              Speed    MTU
 --------------------------------------------------------------------------------
 mgmt0  --           up     10.89.216.198                           1000    1500   
 --------------------------------------------------------------------------------
 Ethernet        VLAN    Type Mode   Status  Reason                 Speed     Port
 Interface                                                                    Ch #
 --------------------------------------------------------------------------------
 Eth1/15         1       eth  trunk  up      none                     100G(D) 10
 Eth1/16         1       eth  trunk  down   Link not connected       auto(D) 10
 Eth1/17         1       eth  trunk  down    XCVR not inserted        auto(D) 10