跳转到主内容

由于 NVRAM 日志在无切换到切换转换后未同步,因此无法接管

Views:
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

适用于

  • AFF 系统
  • FAS 系统
  • ASA 系统
  • C 系列系统
  • ONTAP 9

问题描述

  • 转换为切换配置后,遇到错误:

Cluster::*> cluster ping-cluster -node Node-01
Host is Node-01
Getting addresses from network interface table...
Cluster Node-01_clus1 xxx.xxx.xxx.xxx Node-01 e0e
Cluster Node-01_clus1 xxx.xxx.xxx.xxx Node-01 e0d
.
.
.
Ping status:
............................
Basic connectivity succeeds on X path(s)
Basic connectivity fails on 0 path(s)
................................................................................................................
Detected 1500 byte MTU on X path(s):
   Local xxx.xxx.xxx.xxx to Remote xxx.xxx.xxx.xxx
   Local xxx.xxx.xxx.xxx to Remote xxx.xxx.xxx.xxx
Larger than PMTU communication fails on X path(s):
   Local xxx.xxx.xxx.xxx to Remote xxx.xxx.xxx.xxx
   Local xxx.xxx.xxx.xxx to Remote xxx.xxx.xxx.xxx
   
RPC status:
X paths up, 0 paths down (tcp check)
X paths up, 0 paths down (udp check)

  • 存储故障转移报告:

aff-2n-netapp::*> storage failover show
                Takeover
Node       Partner     Possible State Description
-------------- -------------- -------- -------------------------------------
aff-2n-netapp-2a aff-2n-netapp-2b false    Takeover is not possible: Storage failover interconnect error, NVRAM log not synchronized, Disk inventory not exchanged
aff-2n-netapp-2b aff-2n-netapp-2a false    Takeover is not possible: Storage failover interconnect error, NVRAM log not synchronized, Disk inventory not exchanged
2 entries were displayed.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.