在应用RC框架1.8或更高版本时、出现Cisco 3132Q消息"未配置TCAM区域"
适用场景
- Cisco 3132Q集群交换机
- RC框架1.8及更高版本
警告 文章不适用于MetroCluster IP配置 |
问题描述
- 将1.8 RCF(或更高版本)应用于集群交换机时、会出现以下警报:
Unable to perform the action due to incompatibility: Module 1 returned status "TCAM region is
not configured. Please configure TCAM region and retry the command"