跳转到主内容

主机未收到报告LUN命令

  1. 最后更新
  2. 另存为PDF
Views:
5
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>2009455001.</a>
Specialty:
san
Last Updated:

适用场景

  • ONTAP 9.x
  • Cisco UCS 4.2 (2)
  • Cisco UCS 4.2 (1)
  • Cisco交换机8.1 (2)

问题描述

主机未从存储收到报告LUN响应。 
 
  • 报告从主机发送的LUN。
2023-03-02T20:11:04.049Z cpu65:2098272)nfnic: <2>: INFO: fnic_send_reportLuns: 646: send_reportlun_counter:1 target fcid: 0x000000
 
  • 在主机上重试报告LUN。
2023-03-02T20:11:29.054Z cpu91:2120926)nfnic: <2>: INFO: fnic_world_report_lun_retry: 1517: report lun retry
 
  • 请重试并返回成功响应。
2023-03-02T20:11:29.054Z cpu61:2098274)nfnic: <2>: INFO: fnic_handle_report_lun: 1363: Report luns response for target_fcid : 0x000000 target_id:10 num_luns 3

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.