跳转到主内容

尝试在Cisco交换机上安装NX-OS 10.3 (1) F或更高版本时、返回代码0x404537

Views:
34
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

适用场景

  • 10.3 (1) F或更高版本的 Cisco NX-OS软件
  • Cisco集群互连交换机

问题描述

尝试安装 NX-OS 10.3 (1) F或更高版本会导致以下错误:

switch# install all nxos bootflash:nxos64-cs.10.3.1.F.bin
Installer will perform compatibility check first. Please wait. 
Installer is forced disruptive Verifying image bootflash:/nxos64-cs.10.3.1.F.bin for boot variable "nxos".
[#           ]   0% -- FAIL.
Return code 0x40450037 (Not a valid nxos image). Please check the image cksum using `show file  md5sum`.
Pre-upgrade check failed. Return code 0x40450037 (Not a valid nxos image).

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.