RCF 无法正确应用，导致集群网络降级

最后更新
另存为PDF

Views:: 254

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: hw

Last Updated:

适用于

集群互联交换机
RCF 升级

问题

在 RCF 升级过程中，RCF 的配置无法应用：

user=admin:cmd=configure terminal ; interface Ethernet1/1-8, Ethernet1/9/1-4, Ethernet1/10/1-4 ; spanning-tree port type edge trunk (FAILURE) user=admin:cmd=configure terminal ; interface Ethernet1/1-8, Ethernet1/9/1-4, Ethernet1/10/1-4 ; inherit port-profile CLUSTER_HA (FAILURE) user=admin:cmd=configure terminal ; interface Ethernet1/11-22 ; spanning-tree port type edge trunk (FAILURE) user=admin:cmd=configure terminal ; interface Ethernet1/11-22 ; inherit port-profile STORAGE (FAILURE) user=admin:cmd=configure terminal ; interface Ethernet1/11-22 ; switchport vlan mapping 30 dot1q-tunnel 31 (FAILURE) user=admin:cmd=configure terminal ; interface Ethernet1/23-34 ; inherit port-profile STORAGE (FAILURE)

升级后，在 EMS 中看到集群端口出现错误：

Node 01: vifmgr: callhome.clus.net.degraded:alert]: Call home for CLUSTER NETWORK DEGRADED: Large MTU Packet Loss - Ping failures detected between Node01_clus1 ( xxx.xxx.xxx.xxx ) on Node01 and Node02_clus1 ( XXX.XXX.XXX.XXX ) on Node02.

在每个节点的所有集群端口上均发现 CRC 错误。