跳转到主内容

由于缺少冗余交换机条目,出现 ClusterSwitchConnectionDegraded_Alert

Views:
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

适用于

  • ONTAP 9
  • 事件消息系统 (EMS)
  • 集群交换机

问题

  • EMS 报告"ClusterSwitchConnectionDegraded_Alert"

Fri Dec 20 19:11:41 +0100 [CLUSTER-01: cshmd: hm.alert.raised:alert]: Alert Id = ClusterSwitchConnectionDegraded_Alert , Alerting Resource = CLUSTER-01 raised by monitor ethernet-switch

  • 在系统健康警报中可以看到相同的警报

 Cluster::*> system health alert show
Node: node
Alert ID: ClusterSwitchConnectionDegraded_Alert
Resource: node
Severity: Major
Indication Time: Thu Mar 06 15:03:16 2025
Suppress: false
Acknowledge: false
Probable Cause: Only one cluster switch,
"switch", has been discovered
to be connected to the cluster ports of node
"node". If a cluster connection was not
discovered, but the expected cluster switch is listed
in the output of "system switch ethernet show", it
indicates that the node is not currently receiving
discovery information about the missing switches.

  • 但是,从设备发现中,我们可以看到这两台交换机

Cluster::> network device-discovery show

Node/     Local  Discovered
Protocol   Port   Device           Interface      Platform
----------- ------ ------------------------- ----------------  ----------------
Cluster-N1/cdp
       e0a   ClusterSW1(XXXXXXX)
                       Ethernet1/10  N9K-C9336C-FX2
       e0b   ClusterSW2(YYYYYYY)
                       Ethernet1/11  N9K-C9336C-FX2
Cluster-N1/cdp
       e0a   ClusterSW1(XXXXXXX)
                       Ethernet1/10  N9K-C9336C-FX2
       e0b   ClusterSW2(YYYYYYY)
                       Ethernet1/11  N9K-C9336C-FX2

  • 从 system switch ethernet show 中,我们只能看到一个交换机的条目 

Cluster::*> system switch ethernet show -instance

                  Device Name: ClusterSW2
                   IP Address: 192.xx.x.9
                  SNMP Version: SNMPv2c
                 Is Discovered: true
      Community String or SNMPv3 Username: cshm1!
                  Model Number: N9K-C9336C-FX2
                 Switch Network: cluster-network
                Software Version: Cisco Nexus Operating System (NX-OS) Software, Version 10.3(4a)
           Reason For Not Monitoring: Monitoring disabled by user
            Source Of Switch Version: CDP/ISDP
                 Is Monitored ?: false
          Serial Number of the Device: unknown

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.