跳转到主内容

由于交换机端SFP出现故障、Brocade FC端口脱机且状态为In-Sync

Views:
19
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

适用场景

  • 所有Brocade硬件平台
  • 所有Brocade网络结构操作系统(FOS)平台

问题描述

  • 交换机端口状态在switchshow输出下显示 In_Sync

/fabos/bin/switchshow :
Index Slot Port Address Media Speed State Proto
============================================================
87    10    7   695740   id   N32  In_Sync FC

  • porterrshow输出显示 观察到 link fai l错误:

/fabos/cliexec/porterrshow :
           frames     enc    crc    crc    too    too    bad    enc   disc link   loss   loss   frjt   fbsy    c3timeout    pcs    uncor
     tx     rx    in    err    g_eof   shrt   long   eof    out      c3    fail   sync   sig            tx    rx    err    err
  87:    0     0     0     0     0     0     0     0     0     0     21    0     0     0     0     0     0     0     0

  • 受影响端口的portShow报告 offline  状态:

portDisableReason: None
portCFlags: 0x1
portFlags: 0x4041        PRESENT U_PORT LED
LocalSwcFlags: 0x0
portType:  26.0
portState: 2      Offline
Protocol: FC
portPhys:  6      In_Sync         portScn:   2      Offline
port generation number:   4188
state transition count:   13

  • sfpshow 报告 Tx 值太低:

RX Power:   -3.4   dBm (461.4uW)
TX Power:   -30.5   dBm (0.9   uW)

  • SFP出现故障、并出现Tx -INF:

RX Power:   -0.1   dBm (979.0uW)   10.0   uW  1995.3 uW  15.8   uW   1584.9 uW
TX Power:   -inf   dBm (0.0   uW) 125.9  uW  1995.3 uW  158.5  uW   1584.9 uW

  • 在错误转储日志中defALL_OTHER_F_PORTSLR_5,defALL_OTHER_F_PORTSITW_21, defALL_32GSWL_SFPTXP_251 & defALL_PORTSLF_3、生成的规则defALL_OTHER_F_PORTSLR_5,defALL_OTHER_F_PORTSITW_21, defALL_32GSWL_SFPTXP_251 & defALL_PORTSLF_3 规则如下所示:

2023/05/30-22:21:59 (IST), [MAPS-1003], 194348, SLOT 2 | FID 128 | PORT 10/7, WARNING, NTTC_X6_UAT_105_FAB1, slot10 port7, F-Port 10/7, Condition=ALL_OTHER_F_PORTS(LR/min>5), Current Value:[LR, 6 LRs], RuleName=defALL_OTHER_F_PORTSLR_5, Dashboard Category=Port Health, Quiet Time=None.
2023/05/30-22:22:47 (IST), [MAPS-1003], 194349, SLOT 2 | FID 128 | PORT 10/7, WARNING, NTTC_X6_UAT_105_FAB1, slot10 port7, F-Port 10/7, Condition=ALL_OTHER_F_PORTS(ITW/min>21), Current Value:[ITW, 329 ITWs], RuleName=defALL_OTHER_F_PORTSITW_21, Dashboard Category=Port Health, Quiet Time=None.
Line 13187: 2023/05/30-23:15:23 (IST), [MAPS-1005], 194380, SLOT 2 | FID 128 | PORT 10/7, WARNING, NTTC_X6_UAT_105_FAB1, SFP 10/7, Condition=ALL_32GSWL_SFP(TXP/NONE<=251), Current Value:[TXP, 138 uW], Rule defALL_32GSWL_SFPTXP_251 triggered 6 times in 1 hour and last trigger time Tue May 30 23:09:23 2023, Dashboard Category=Port Health.Line 13257: 2023/05/31-00:20:23 (IST), [MAPS-1006], 194415, SLOT 2 | FID 128 | PORT 10/7, INFO, NTTC_X6_UAT_105_FAB1, SFP 10/7, Latest Value=[TXP, 86 uW].
MAPS-1003], 194543, SLOT 2 | FID 128 | PORT 10/7, WARNING, NTTC_X6_UAT_105_FAB1, slot10 port7, U-Port 10/7, Condition=ALL_PORTS(LF/min>3), Current Value:[LF, 11 LFs], RuleName=defALL_PORTSLF_3, Dashboard Category=Port Health, Quiet Time=None.

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.