跳转到主内容

Brocade光纤交换机管理端口无法协商为全双工

  1. 最后更新
  2. 另存为PDF
Views:
7
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
metrocluster
Last Updated:

适用场景

  • Brocade 6505光纤交换机

问题描述

要将固件映像传输到交换机进行升级、管理端口必须为全双工。但是、端口0正在协商半双工、即使已配置为全双工。

FirmwareDownload is not allowed because half duplex is configured.
Use ethif --set to clear half duplex configuration before upgrade

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.