跳转到主内容

E-Series iSCSI 连接频繁报告 1815/1814/180D 错误

Views:
45
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

适用于

  • NetApp E-Series
  • iSCSI

问题

  • 控制器报告以下错误:
    • Event type: 1815 ISCSI carrier has been lost
    • Event type: 1814 ISCSI carrier has been detected
    • Event type: 180D Session terminated unexpectedly
  • Recovery Guru 报告 ALB_HOST_REDUNDANCY_LOST-Recovery Failure 错误。
  • iscsi-statistics.csvMAC receive statistics 中记录大量 CRC 错误:

注: FCRCE = 帧 CRC 错误计数

E-Series iSCSI connection reports

  • STATE-CAPTURE-DATA -> iscsiStateCapture ->  showIscsiStats(ISCSI_STATISTICS_RAW) 下的错误计数器指示所有错误均来自 Rx(接收):

    ========================================================================
               ETHERNET PORT STATISTICS - PORT 0
    ========================================================================
      Port Rx Frame CRC Err Count   0xbdef6 

    ========================================================================
                 IP ENDPOINT STATISTICS - PORT 0
    ========================================================================
      IPV4 Received Pdus         0x0
      IPV4 Sent Pdus           0x0
      IPV4 Reassembly Required      0x0
      IPV4 Fragmentation         0x0
      IPV4 Fragmented Pdus Created    0x0
      IPV4 Tx Byte Count         0x0
      IPV4 Rx Byte Count         0x0
      IPV4 Rx Error Count        0x3eff 

  • 但目标端口 (e0a) 显示正常状态:

Hostinterface:   iSCSI
HostInterfaceCard(HIC):   Baseboard
Channel:   1
Port:   e0a
Linkstatus:   Connected

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.