在vdmRecoverAllRAIDVols之后重新启动控制器

最后更新
另存为PDF

Views:: 7

Visibility:: Internal

Votes:: 0

Category:: e-series-systems

Specialty:: esg<a>2009403814</a>

Last Updated:

适用场景

NetApp E 系列
SANtricity OS 11.60

问题描述

一个或多个卷因断电而发生故障
一个或两个控制器在运行后重新启动 vdmRecoverAllRAIDVols

-> vdmRecoverAllRAIDVols 1,1

***********************************************************************

* In order to properly recover cache for the failed volumes, it is *

* necessary to reboot both controllers simultaneously before running *

* vdmRecoverAllRAIDVols. If alt controller is already held in reset, *

* just reboot this controller. *

* NOTE: Depending on the failure condition, vdmRecoverAllRAIDVols *

* may need to be executed multiple times in order to recover all*

* failed volumes. *

***********************************************************************

Have controllers been rebooted since volumes failed? (Y/N): y

vdmRecoverAllRAIDVols started in a background task. Please wait...

*************************** PieceManager OOS Pieces **********************

value = 0 = 0x0

->

**************************************************************************

...

MM/DD/YY-hh:mm:ss (raidSched1): WARN:  taskMgmtReqrcvd(Abort Task Set (0x2)): channel:6 from host: HOST1P0 tditn: 3 lun: x04 AbortTag: x177b ManagedTag: x0000

MM/DD/YY-hh:mm:ss (vdmRecov): NOTE:  moveFailedPiecesToPlaceHolder: moved 33641 CPieces for ssid 0x7 (ok) totalCStripes=51200 Degraded 6827 Critical 13407

Reboot due to ancient IO, scsiOp=0x1431d7bc0 poolId=1 opCode=9e

age=300136ms