跳转到主内容

更换驱动器后,驱动器显示为不兼容

Views:
68
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

适用场景

NetApp E 系列 E2800

问题描述

  • 更换驱动器后,驱动器显示不兼容,并显示错误 "Firmware error trying to use drive" :
BASIC:
 
SHELF, DRAWER, BAY STATUS CAPACITY MEDIA TYPE INTERFACE TYPE CURRENT DATA RATE PRODUCT ID FIRMWARE VERSION CAPABILITIES
...
99, 2, 5 Incompatible 3,726.023 GB Hard Disk Drive SAS 12 Gbps HUS726040ALS214 MS01 DA
 
 
DETAILS
 
Drive at Shelf 99, Drawer 2, Bay 5
 
Status: Incompatible
Cause: Firmware error trying to use drive
 
Mode: Incompatible
Raw capacity: 3,726.023 GB
Usable capacity: 3,720.523 GB
 
  • 初始化驱动器(硬件 > 选择驱动 器 > 初始化)失败,并出现以下错误:
A drive operation cannot be performed because the drive is not in the correct state for the operation. (API 410)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • 这篇文章对您有帮助吗?