跳转到主内容

E系列驱动器更换后无响应

Views:
23
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

适用于

  • NetApp E 系列
  • 所有固件版本
  • 磁盘驱动器已更换

问题描述

  • STORAGE-ARRAY-PROFILE 中驱动器在更换后显示无响应

    SHELF, DRAWER, BAY  STATUS     CAPACITY   MEDIA TYPE     INTERFACE TYPE  CURRENT DATA RATE  PRODUCT ID     FIRMWARE VERSION  CAPABILITIES  
    99,   4,    6   Optimal     10.692 TB  Hard Disk Drive  SAS        12 Gbps       HUH721212AL5204  NE00        DA
    99,   4,    7   Unresponsive
    99,   4,    8   Optimal     10.692 TB  Hard Disk Drive  SAS        12 Gbps       HUH721212AL5204  NE00        DA

  • Recovery Guru 消息还显示无响应磁盘

Failure Entry 4: FAILED_DRIVE-Recovery Failure Type Code: 23
Storage array: ArrayName
Component reporting problem: Drive in bay 0
Status: Unresponsive
Location: Controller/Drive shelf 0, Drawer 0

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.