IOM (ESM)定期报告异常事件、但未检测到E-Series上的任何明显问题
适用场景
- E 系列
- 磁盘架上的I/O模块(IOM)或环境服务模块(ESM)
问题描述
- 在重大事件日志中、
IOM (ESM) has reported an exception event has occurred会 定期显示消息：
Date/Time: xxx-xx-xx-xx
Sequence number: 3271
Event type: 2866
Event category: Failure
Priority: Warning
Event needs attention: true
Event send alert: true
Event visibility: true
Description: An IOM (ESM) has reported an exception event
Event specific codes: 0/0/0
Component type: Tray Component (ESM)
Component location: Tray 1, Slot B
Logged by: Controller in slot A- 检查Recovery Guru是否没有警报，此外，IOM (ESM) 处于最佳 状态：
ESM card status: Optimal
Firmware Version: 0120
Configuration settings version: Not Applicable
Maximum data rate: 12 Gbps
Current data rate: 12 Gbps
Location: A
Card communication: OK
Trunking supported: No
Product ID: DE224C
Part number: 111-04850+A3
Serial number: 032241xxxxxx
Date of manufacture: Not Available
ESM card status: Optimal
Firmware Version: 0120
Configuration settings version: Not Applicable
Maximum data rate: 12 Gbps
Current data rate: 12 Gbps
Location: B
Card communication: OK
Trunking supported: No
Product ID: DE224C
Part number: 111-04850+A3
Serial number: 032241xxxxxx
Date of manufacture: Not Available
- 在ASUP ->上未找到任何结果
TRAY-COMPONENT-STATE-CAPTURE.7Z log