跳转到主内容

E-Series IOM (ESM) 暂时失效并在短时间内恢复到最佳状态

Views:
47
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

适用于

StorageGRID 设备 SG5800、SG6160(具有 E-Series E4000 存储控制器)

问题描述

  • 以下事件已报告,然后很快得到解决
    • Controller shelf component failed
    • Temperature sensor removed
    • An IOM (ESM) has reported an exception event
  • STORAGE-ARRAY-PROFILE > SHELVES 表示:
    •  IOM status 临时更改为 Failed 然后很快返回到 Optimal
    • 2 个 IOM,一个带有存储控制器序列号,另一个带有计算控制器序列号

 IOMs Detected:  2

     IOM status:            Optimal       
     Firmware Version:         0201        
     Configuration settings version:  Not Applicable   
     Maximum data rate:         12 Gbps       
     Current data rate:         12 Gbps       
     Location:             A          
     Card communication:        OK         
     Trunking supported:        No         
     Product ID:            DE460C       
     Board ID:             Not Available    
     Part number:            111-05275+A2    
     Serial number:          <STORAGE CONTROLLER SERIAL NUMBER>
     Date of manufacture:        Not Available    

     IOM status:            Optimal       
     Firmware Version:         0201        
     Configuration settings version:  Not Applicable   
     Maximum data rate:         12 Gbps       
     Current data rate:         12 Gbps       
     Location:             B          
     Card communication:        OK         
     Trunking supported:        No         
     Product ID:            DE460C       
     Board ID:             Not Available    
     Part number:            111-05277+A2    
     Serial number:          <COMPUTE CONTROLLER SERIAL NUMBER>   
     Date of manufacture:        Not Available  

  • RECOVERY-GURU-PROCEDURES.HTML表示No data found

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.