SG6000 连续重启，并显示消息"hostbyte=DID_NO_CONNECT"

最后更新
另存为PDF

Views:: 6

Visibility:: Public

Votes:: 0

Category:: storagegrid

Specialty:: sgrid

Last Updated:

适用于

NetApp StorageGrid SG6000
固件版本 11.3

问题

SG6000 处于引导循环中
到后端存储的路径丢失
每次重启循环后，在虚拟控制台或串行连接中会看到以下事件：

sd 16:0:0:251: [sdp] Synchronizing SCSI cache sd 16:0:0:251: [sdp] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK scsi 16:0:0:251: rdac: Detached sd 16:0:0:252: [sdq] Synchronizing SCSI cache sd 16:0:0:252: [sdq] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK scsi 16:0:0:252: rdac: Detached sd 16:0:0:253: [sdr] Synchronizing SCSI cache sd 16:0:0:253: [sdr] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK scsi 16:0:0:253: rdac: Detached sd 16:0:0:254: [sds] Synchronizing SCSI cache sd 16:0:0:254: [sds] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK scsi 16:0:0:254: rdac: Detached mlx5_core 0000:af:00.1: Shutdown was called mlx5_core 0000:af:00.0: Shutdown was called