跳转到主内容

CX5适配器无法与Cisco Nexus 5648Q链接

适用场景

  • CX4 40/100Gb/秒适配器
  • AFF A400
  • ONTAP 9.7P10
  • Cisco Nexus 5648Q
    • NX-OS 7.3 (1) N1 (1)和7.3 (9) N1 (1)
  • 铜缆

问题描述

  • 使用铜缆将40/100GB端口从CX5适配器连接到Cisco Nexus 5648Q链路时、请勿 启动

示例:

slot 1: 40G/100G Ethernet Controller CX5 e1a MAC Address: b8:ce:f6:XX:YY:ZZ (auto-unknown-fd-down) QSFP Vendor: CISCO-TYCO QSFP Part Number: 2821248-7 QSFP Serial Number: XXXXXXXXXXX-A e1b MAC Address: b8:ce:f6:XX:YY:AA (auto-unknown-fd-down) QSFP Vendor: CISCO-TYCO QSFP Part Number: 2821248-7 QSFP Serial Number: XXXXXXXXXXX-A Device Type: CX5 PSID(NAP0000001002) Firmware Version: 16.26.4012 Part Number: MCX516A-CCAT_C21 Hardware Revision: B1 Serial Number: MT2105K09106
  • 在ONTAP 或交换机上手动设置速度/双工不起作用
  • 将交换机固件更新到最新可用版本不起作用
  • 使用铜缆连接同一个CX15适配器的两个端口没有问题

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device