ifgrp成员中的数据以太网端口链路已关闭
适用场景
- 以太网端口
问题描述
- 数据端口链路关闭事件。示例：
[node_name: intr: net.ifgrp.lacp.link.inactive:error]: ifgrp a0a, port e0c has transitioned to an inactive state. The interface group is in a degraded state.
[node_name: intr: net.ifgrp.lacp.link.active:notice]: ifgrp a0a, port e0c has transitioned to the active state.
[node_name: intr: netif.linkDown:info]: Ethernet e0c: Link down, check cable.
[node_name: intr: netif.linkUp:info]: Ethernet e0c: Link up.
...
[node_name: intr: net.ifgrp.lacp.link.inactive:error]: ifgrp a0a, port e0c has transitioned to an inactive state. The interface group is in a degraded state.
[node_name: intr: net.ifgrp.lacp.link.active:notice]: ifgrp a0a, port e0c has transitioned to the active state.
[node_name: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node_name, port e0c.
[node_name: intr: netif.linkDown:info]: Ethernet e0c: Link down, check cable.IFCONFIG -vvv将端口Rx功率显示为0
status: no carrier
plugged: SFP/SFP+/SFP28 10G Base-SR (LC)
vendor: Intel Corp PN: FTLX8574D3BCV-IT SN: A41A571 DATE: 2020-06-30
module temperature: 32.03 C Voltage: 3.37 Volts
RX: 0.00 mW (-26.78 dBm) TX: 0.22 mW (-6.57 dBm)
- 重新安装后、问题描述 仍会保留
- 问题描述 仍会显示端口up-admin已关闭/已启动
- 在问题描述 中、交换机端的端口关闭/未关闭
- 问题描述 仍具有ifgrp的添加/删除端口
- 此端口可与另一个SFP+配合使用