跳转到主内容

NS224 中的 NSM100 模块不可用

Views:
36
Visibility:
Public
Votes:
0
Category:
disk-shelves
Specialty:
hw
Last Updated:

适用场景

  • 使用NS224磁盘架的所有AFF系统
  • NSM100磁盘架模块

问题描述

  • 连接到同一NSM100模块的两个节点上的存储端口均发生故障

[node_name-1: kernel: netif.linkDown:info]: Ethernet e5a: Link down, check cable.
[node_name-1: intr: netif.linkDown:info]: Ethernet e5a-30: Link down, check cable.
[node_name-1: scsi_cmdblk_strthr_admin: scsi.cmd.pastTimeToLive:error]: Disk device e5a.40.0.0L0: request failed after try #1: cdb 0xe2.

[node_name-2: kernel: netif.linkDown:info]: Ethernet e3b: Link down, check cable.
[node_name-2: intr: netif.linkDown:info]: Ethernet e3b-30: Link down, check cable.
[node_name-2: scsi_cmdblk_strthr_admin: scsi.cmd.pastTimeToLive:error]: Disk device e3b.40.1.12L0: request failed after try #1: cdb 0xe2.

  • 报告NS224磁盘架路径丢失的事件消息:

[node_name-1: nchmd: hm.alert.raised:alert]: Alert Id = NoPathToNSMB_Alert , Alerting Resource = 012345678910111213 raised by monitor node-connect
[node_name-1: dsa_disc: shelf.config.tomixed:notice]: System has transitioned to a mixture of single path, multi-path or quad-path storage configurations.

或:

EventMessage = warning event on node_name-1 (Disk Shelf Multipath Not Configured)
ocumEventMessageDetails = Disk shelf has either one or no path connected to the node.

 

  • system health alert show 输出:

Monitor node-connect
Alert ID NoPathToNSMA_Alert
Alerting Resource XXXXXXXXXXXXXXXXXXX
Subsystem SAS-connect
Indication Time Sun May 08 22:44:17 2022
Perceived Severity Major
Probable Cause Cable_tamper
Description Controller node_name-1 is connected only to module B of shelf 10.10 through port e3b.
Corrective Actions
1. Consult the guide applicable to your NVMe storage shelf to review cabling rules for your system.
2. Connect controller node_name-1 to module A and module B of shelf 10.10.
Possible Effect You will lose access to shelf 10.10 if module B fails.

  • system node run -node node_name-1 -command sysconfig -a 输出、显示一个路径已关闭和一个"缺失"模块:

slot 0: 40G/100G Ethernet Controller CX5
   e0c MAC Address:   00:11:22:33:44:55 (auto-100g_cr4-fd-up)
      QSFP Vendor:      Molex
      QSFP Part Number:   112-00574
      QSFP Serial Number:  99A0123456789
      00.0.0: NETAPP   X4011S172B3T8NTE NA56 3662.5GB 4160B/sect (S99YNA9MB00001)
       ...
      00.0.23: NETAPP   X4011S172B3T8NTE NA56 3662.5GB 4160B/sect (S99YNA9MB00024)
      Shelf 0: NS224NSM100  Firmware rev. NSM100 A: 0151  B: ----
slot 0: 40G/100G Ethernet Controller CX5
   e0f MAC Address:   d0:39:ea:15:0b:d0 (auto-unknown-fd-down)
      QSFP Vendor:      Molex
      QSFP Part Number:   112-00574
      QSFP Serial Number:  99A0123456780

 

  • 当一个模块出现故障时、系统将从多路径HA配置过渡到单路径HA配置:

::>storage shelf show -instance
Modules:                     
                Monitor   Is    ... Operational Module
ID Part No.    ES Serial No. is Active Master ... Status    Location
--- ------------ ------------- --------- ------ ... ----------- --------------
  a -       -        true    false  ... error    rear of the shelf at the top, on module A
  b 111-04256+B1 xxxxxxxxxxxx  true    true   ... normal    rear of the shelf at the bottom, on module B

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.