跳转到主内容

如何升级或降级 Brocade 交换机固件

Views:
465
Visibility:
Public
Votes:
1
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

 

适用场景

  • SAN
  • Brocade光纤通道 交换机
  • FlexPod

问题描述

升级/降级 Brocade交换机上的固件。

操作步骤

此操作步骤不适用于光纤连接的MetroCluster。

注:

  • 此操作步骤 要求在Windows或UNIX工作站上运行FTP服务。Brocade测试并支持Microsoft IIS。
  • 对于较早版本的Fabric OS、可能需要分步升级。请参见Brocade Fabric OS目标路径选择指南。  

示例:

v7.4.x—> v8.0.x—> v8.1.x

  1. 如何从NetApp获取Brocade Fabric OS
  2. 使用 configupload 命令备份配置并 收集supportsave
  3. 使用以下方法之一(使用SANNAV或命令行界面)升级交换机-
    1. 使用SANNAV、 请参阅- 使用SANNAV升级Brocade交换机
    2. 使用CLI/SSH ,按照以下步骤操作:
      1. 验证工作站是否可以对Brocade交换机执行ping操作
      2. 在中找到提取的固件目录结构ftproot
      3. firmwaredownload 在Brocade交换机上运行命令。固件更新可通过命令行界面或Web界面完成
      4. 提供工作站IP地址
      5. 以匿名或有效的FTP用户身份登录
      6. 提供相对于的固件目录路径 ftproot ,然后键入 release.plist

示例:

对于8.4.0版,路径如下所示:  fw/v8.4.0/release.plist

注: release.plist 文件不在固件目录/fw/v8.4.0()的根目录中列出,但固件将 release.plist 根据其交换机类型使用子目录中的相应文件。

 

  1. 交换机将更新二级固件、重新启动、更新主固件、然后最后一次重新启动。
  2. 完成后、键入 version 和进行确认 firmwareshow.

追加信息

  • 对于控制器交换机、在升级之前需要确保HA同步处于状态。
  • 可以运行以下命令来检查HA状态。
    • hashow
    • slotshow -m
    • chassisshow
    • haredundancy –show
  • 要检查在执行升级时是否可以绕过TruFOS证书、请参见下面的Broadcom链接。

参考文档: 在各种光纤操作系统升级和下载场景中支持Brocade TruFOS证书

相关链接:

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.