跳转到主内容

Brocade X6 交换机如何对 firmwaredownload 命令做出响应？

  1. 最后更新
  2. 另存为PDF
Views:
3
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

适用场景

Brocade X6 控制器

问题解答

  • 要使 Brocade X6 交换机上的 firmwaredownload 无中断，此命令hashow 需要显示所有刀片式服务器 HA 状态已同步。
switch:admin> hashow
Local CP (Slot 5, CP0): Active, Warm Recovered
Remote CP (Slot 6, CP1): Standby, Healthy
HA enabled, Heartbeat Up, HA State synchronized
 
  • 备用 CP 应首先执行升级。
  • 这样，备用 CP 便可在活动 CP 完成后接管它。
  • 如果 HA 状态未同步，您可以尝试使用命令重新同步 hasyncstart

追加信息

不适用
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.