跳转到主内容

更换驱动器后,驱动器显示为不兼容

Views:
8
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

适用于

E2800

问题

  • 更换驱动器后,驱动器显示为不兼容,并导致 "Firmware error trying to use drive" :
BASIC:
 
SHELF, DRAWER, BAY STATUS CAPACITY MEDIA TYPE INTERFACE TYPE CURRENT DATA RATE PRODUCT ID FIRMWARE VERSION CAPABILITIES
...
99, 2, 5 Incompatible 3,726.023 GB Hard Disk Drive SAS 12 Gbps HUS726040ALS214 MS01 DA
 
 
DETAILS
 
Drive at Shelf 99, Drawer 2, Bay 5
 
Status: Incompatible
Cause: Firmware error trying to use drive
 
Mode: Incompatible
Raw capacity: 3,726.023 GB
Usable capacity: 3,720.523 GB
 
  • 初始化驱动器(硬件 > 选择驱动器 > 初始化)失败,并出现以下错误:
A drive operation cannot be performed because the drive is not in the correct state for the operation. (API 410)

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support