跳转到主内容

如何禁用 spares_low AutoSupport 通知

Views:
19
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

适用场景

  • ONTAP 9
  • 包含16个或更少驱动器的AFF / FAS系统

问题描述

raid.min_spare_count 选项用于指定避免出现备用驱动器不足警告所需的最小备用驱动器数。

  • 如果每个文件系统驱动器都具有在中指定的最小备用驱动器数 raid.min_spare_count 、这些驱动器是合适的替换驱动器、则不会针对备用磁盘不足显示任何警告。
  • 此选项可设置为0到4。
    • 对于容量优化型平台(例如AFF C190)、默认设置为0;对于其他平台(例如FAS2720)、默认设置为1
    • 如果将此选项设置为0、则表示即使没有可用的备用磁盘、也不会针对备用磁盘不足显示任何警告。
    • 只有在使用RAID-DP聚合连接了16个或更少驱动器的独立系统或HA系统上、此选项才可设置为0。
    • 如果未进行容量优化的系统在将此选项设置为0的情况下扩展到16个以上的驱动器、则此选项将自动更改为1。
  • 使用RAID4聚合的系统不允许设置为0。

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.