跳转到主内容

文件系统磁盘标签错误- AutoSupport 消息

Views:
111
Visibility:
Public
Votes:
8
Category:
ontap-9
Specialty:
hw
Last Updated:

状态信息

适用场景

  • ONTAP 9
  • Data ONTAP 8 7-模式
  • CallHome.dsk.label
  • callhome.fdsk.label
    • raid.config.filesystem.disk.bad.label

事件摘要

  • 如果磁盘驱动器因意外的RAID元数据而发生故障、则会出现此消息。
  • 通常是由于添加之前在其他ONTAP 操作系统中使用的未置零驱动器而导致的。
  • 驱动器并未真正出现故障。由于ONTAP 版本不匹配、磁盘显示 bad label 为故障。
 [Node Name: config_thread: callhome.dsk.label:alert]: Call home for DISK BAD LABEL 

验证

事件日志

event log show -severity * -Message-name *bad.label*

Fri Apr 29 14:11:31 +0200 [Node Name: config_thread: raid.assim.disk.nolabels:EMERGENCY]: Disk 0d.23.17 Shelf 23 Bay 17 [NETAPP X357_S163A3T8ATE NA51] S/N [S394NA0J219221] UID [5002538A:072721E0:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000] has no valid labels. It will be taken out of service to prevent possible data loss.

Fri Apr 29 14:11:31 +0200 [Node Name: config_thread: raid.config.disk.bad.label:notice]: Disk 0d.23.17 Shelf 23 Bay 17 [NETAPP X357_S163A3T8ATE NA51] S/N [S394NA0J219221] UID [5002538A:072721E0:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000] has bad or missing data on label.

命令行

storage disk show -broken

 ::>storagediskshow -broken Original Owner: node1 Checksum Compatibility: block Usable Physical Disk Outage Reason HA Shelf Bay Chan Pool Type RPM Size Size --------------- ------------- ------------ ---- ------ ----- ------ -------- -------- 1.1.0 bad label 0b 1 0 A Pool0 FCAL 10000 132.8GB 133.9GB 1.2.6 bad label 0b 2 6 A Pool1 FCAL 10000 132.8GB 134.2GB Original Owner: node2 Checksum Compatibility: block Usable Physical Disk Outage Reason HA Shelf Bay Chan Pool Type RPM Size Size --------------- ------------- ------------ ---- ------ ----- ------ -------- -------- 1.1.0 bad label 0a 1 0 B Pool0 FCAL 10000 132.8GB 133.9GB 1.1.13 bad label 0a 1 13 B Pool0 FCAL 10000 132.8GB 133.9GB 

解决方法

以下操作计划假定磁盘不是要迁移到新系统的关键数据磁盘。验证相关磁盘是否不存储生产数据。 
  1. 使驱动器无故障
  1. 使驱动器恢复到备用池中

::> priv set advanced
::*> storage disk unfail -s <disk_name>

  1. 根据需要重复上述步骤多次、 以使 其余驱动器无故障
  2. 检查最近 未出现故障 的驱动器是否显示在备用池中

::*> storage aggr status -s

  1. 下一步是通过将驱动器置零来清除错误标签

::*> storage disk zerospares -owner <nodename>

  • 磁盘零完成后、错误的标签将被清除

追加信息

出现此AutoSupport 消息的常见原因:

已对驱动器应用驱动器清理 运行disk sanitize release命令后、磁盘不属于所有者或报告标签错误
MetroCluster IP-运行MetroCluster configuration-settings connection connect后立即出现"Bad Label" MetroCluster configuration-settings connection connect后的磁盘标签错误

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device