跳转到主内容

NetApp wins prestigious Coveo Relevance Pinnacle Award. Learn more!

INSIGHT Japan :2023年 1月25日(水)ANAインターコンチネンタルホテル開催 へ参加・申込を行う

fcvi.qlgc.qpErr : FC-VI 适配器:端口 x 上的 FCVI 驱动程序收到 QP 错误

Views:
2
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster<a>2008834464</a><a>翻译</a>
Last Updated:

适用场景

  • ONTAP 9
  • 光纤连接MetroCluster
  • Brocade存储交换机

问题描述

  • 事件日志中报告了以下错误:

fcvi.qlgc.qpErr: FC-VI adapter: FCVI driver on port X received QP Error. QP name = Control, QP
index = 0x1, VI state = Error(state code = 0x3), sub-error = Message ID error(OOD)(error code = 0x6). Remote node's system id =x. This error has occured X times.

  • Brocade交换机 portterrshow在命令输出中报告受影响端口上的错误:

porterrshow     :
      frames    enc   crc   crc   too   enc   disc   link   loss   loss   frjt   fbsy  c3timeout   pcs   uncor
    tx    rx    in   err   g_eof  shrt   out   c3   fail   sync   sig          tx   rx   err   err
  2:   2.1g   1.1g   0    0    0    0    0    64    2    0    2    0    0    0    0    0    0
  3:   2.3g 352.2m   0    4   4    0    0    8.7k  28.7k  1   28.6k  0    0    8.7k  5   1.2k  0

  • Brocade交换机sfpshow在命令输出中报告受影响端口的Tx功率过低:

sfpshow -all :

=============
Port  3:
=============

Current:    10.450  mAmps
Voltage:    3306.4  mVolts
RX Power:   -2.7   dBm (534.3uW)
TX Power:   -6.3   dBm (234.6 uW)

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device