跳转到主内容

OnCommand Unified Manager 中的集群监控失败、出现内部错误:需要一个元素,但为

Views:
25
Visibility:
Public
Votes:
0
Category:
oncommand-unified-manager
Specialty:
om
Last Updated:

状态信息

适用于

  • OnCommand Unified Manager ( OCUM ) 7.2+
  • Active IQ Unified Manager 9.6+%
  • NetApp MetroCluster ( MCC )

问题

  • 将创建一个具有以下触发条件的新事件

Monitoring failed for cluster <clustername>. Reason: An internal error has occurred during MetroCluster component refresh

  • ocumserver.log以下列出的错误应出现在文件中

ERROR [oncommand] [reconcile-5] [<example_ip>(incremental@00:04:02.256)] [c.n.dfm.collector.OcieJmsListener] Error during MetroCluster component monitoring : expected one element but was: <[Brocade_192.168.0.2:FC port0/21:Brocade_192.168.0.3:FC port 0/17], [Brocade_192.168.0.2:FC port 0/21:Brocade_192.168.0.3:FC port 0/21]>

ERROR [oncommand] [reconcile-3] [<example_ip>(incremental@00:19:01.871)] [c.n.dfm.collector.OcieJmsListener] Error during MetroCluster component monitoring : expected one element but was: <[Brocade_192.168.0.2:FC port 0/23:Brocade_192.168.0.3:FC port 0/18], [Brocade_192.168.0.2:FC port 0/23:Brocade_192.168.0.3:FC port 0/23]>

  • 在这种特定情况下、我们可以看到交换机 192.168.0.3 上的端口 21 连接到交换机 192.168.0.2 上的两个不同端口( 17 、 21 )  

注:请在哪些值得注意的日志文件及其各自的位置中查找日志文件位置? 文章

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device