跳转到主内容

scsitarget.slifct.fwUpdErr:更新NetApp存储时收到错误

Views:
5
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2009年422331</a>
Specialty:
hw
Last Updated:

适用场景

  • FAS/AFF 平台
  • 光纤通道目标 HBA

问题描述

  • 在安装新的AFF系统后更新ONTAP版本时、EMS日志会报告以下有关Emulex HBA固件更新失败的消息:

BMC AFFSYSTEM>system console
Press Esc-T or Ctrl-D to exit
[2a] Emulex FW version get failed during setup: -71
[2a] Emulex FW version setup failed: rc: -72, fw_state: 0
Jan 04 13:19:12 [AFFSYSTEM:scsitarget.slifct.fwUpdErr:error]: FC target HBA 2a failed to update the firmware version from  to  with the status of -72.
Jan 04 13:19:12 [AFFSYSTEM:discover.6500.unsupported:notice]: FC-to-SAS bridge ATTO 6500N discovery is disabled.
[2b] Emulex FW version get failed during setup: -71
Jan 04 13:19:15 [AFFSYSTEM:scsitarget.slifct.fwUpdErr:error]: FC target HBA 2b failed to update the firmware version from  to  with the status of -72.
[2b] Emulex FW version setup failed: rc: -72, fw_state: 0
[2c] Emulex FW version get failed during setup: -71
Jan 04 13:19:18 [AFFSYSTEM:scsitarget.slifct.fwUpdErr:error]: FC target HBA 2c failed to update the firmware version from  to  with the status of -72.
[2c] Emulex FW version setup failed: rc: -72, fw_state: 0
[2d] Emulex FW version get failed during setup: -71
Jan 04 13:19:21 [AFFSYSTEM:scsitarget.slifct.fwUpdErr:error]: FC target HBA 2d failed to update the firmware version from  to  with the status of -72.
[2d] Emulex FW version setup failed: rc: -72, fw_state: 0
Boot argument NfsRdmaOk not specified.  Default (set) is in effect.
Boot argument NfsIpOk not specified.  Default (set) is in effect.


Jan 04 13:21:25 [AFFSYSTEM:scsitarget.fct.postFailed:EMERGENCY]: FC target HBA 2a could not initialize because of a POST failure.
Jan 04 13:21:27 [AFFSYSTEM:scsitarget.hwpfct.errorReset:notice]: An error was encountered in the FC target driver on Fibre Channel target adapter 2b. The adapter will be automatically reset to clear the port offline failed, rc:-1 condition.
Jan 04 13:21:27 [AFFSYSTEM:scsitarget.fct.port.offline:error]: Fibre Channel Target port 2b was taken operationally offline due to too many errors received by the FCT driver.

  • BCOMD日志中报告了错误:

0000001e.000036c0 00002cdb Wed Jan 04 2023 13:34:28  01:00 [kern_bcomd:info:7311] 0x80b4d9400: 83ffff0000000001: ERR: SAN::PORT::TABLE: src/tables/fcpPortTable.cc:activePortHealthCheck:299 returning: 82/633 - The following FC adapters with LIFs are not ready: 2a, 2b. If this problem persists, contact technical support.
0000001e.000036d9 00002d3f Wed Jan 04 2023 13:34:38  01:00 [kern_bcomd:info:7311] 0x80b4d9400: 83ffff0000000001: CRIT: SAN::PORT::TABLE: src/tables/fcpPortTable.cc:activePortHealthCheck:253 FC adapter 2a has port-state: offline_hard; correct fault to continue

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.