跳转到主内容

升级到ONTAP 9.9.1后、使用Kerberos 5p挂载NFSv4失败

Views:
1
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas<a>2009063925</a>
Last Updated:

适用场景

  • ONTAP 9.9.1
  • NFS
  • Kerberos 5p

问题描述

如果已将导出策略规则配置为仅允许Kerberos 5p连接、并且系统运行的是9.9.1或更高版本。
  • 要使Mont成功、必须在客户端上指定krb5p挂载选项、因为安全模式协商无法正常工作
  • 自动挂载配置可能不允许挂载NFS资源
如果启用了NFS sktraces、则在命中问题描述 时、sktrace.log中将显示以下后续行
[1:0] Nfs4Req_5: CurrentFlags before NGProcessExportCheck: cfs=0x1004, EAI=0x0 [1:0] Nfs4Req_5: Result EXPORT_NOACCESS: Result=3106

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.