跳转到主内容

FCP 目标适配器上的链路未连接状态与链路断开状态之间有何区别?

Views:
33
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

可不使用  

适用于

  • 在 7-模式下运行的 Data ONTAP
  • ONTAP 8
  • ONTAP 9
  • 所有 FAS 和 AFF 硬件平台

解答

  • 下表列出了 FCP 适配器的所有状态及其相关行为:
状态 定义
未初始化 尚未加载和初始化固件。
链接未连接 驱动程序已完成固件初始化。但是,链路没有物理连接、因此适配器处于脱机状态。
联机 适配器在 FCP 流量中处于联机状态。
链路已断开 由于光纤通道链接脱机事件,适配器脱机。
脱机 适配器对于 FCP 流量处于脱机状态。
由用户 / 系统脱机 用户手动使适配器脱机、或者系统自动使适配器脱机。

其他信息

在此处添加您的文本。

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.