跳转到主内容

VMware ESXi 主机已断开 FC 连接并缺少路径

Views:
80
Visibility:
Public
Votes:
1
Category:
ontap-9
Specialty:
san<a>2009019829</a><a /><a>VMware 机箱的关键灾难处理环境</a>
Last Updated:

适用场景

  • ONTAP
  • VMware ESXi

问题描述

  • 所有SAN启动程序均报告已部分连接
  • 在System Manager中、双节点HA对中每个节点的单个FC端口的 吞吐量为0 MB/秒
  • 在光纤通道环境中, EMS 日志中显示的所有存储节点上都有数百个主机登录(主机登录)( PLOGI )
  • VMware 主机出现断开连接,所有路径均已关闭( APD ),永久设备丢失( PDL )的情况
  • 所有连接问题均通过网络结构注册状态更改通知( RSCN )进行处理
  • 系统稳定后、一个存储目标HBA端口的路径缺失/出现故障
VMware 日志示例:
esxcfg-mpath -b
vmhba2:C0:T6:L1 LUN:1 state:dead fc Adapter: Unavailable Target: Unavailable
vmhba2:C0:T3:L1 LUN:1 state:dead fc Adapter: Unavailable Target: Unavailable

less /var/run/log/vmkernel.log
lpfc_els_rcv_rscn:5945: 0:(0):0214 RSCN received Data:
lpfc_els_rcv_rscn:5955: 0:(0):5973 RSCN received event x0 : Address format x03 : DID x000000
lpfc_handle_status:5079: 0:(0):3271: FCP cmd x8a failed <1/6> sid , did , oxid x7a iotag x417 Invalid RPI Host Retry
NMP: nmp_ThrottleLogForDevice:3861: Cmd 0x8a (,) to dev "naa.xyz" on path "vmhba1:C0:Tx:L1" Failed:
 
NetApp:
bcomd: san.initiator.login.missing:notice]: Initiator "xyx" is not logged in to any LIFs on this node for Vserver "svm123", portset "". Access to LUNs might be disrupted if a failover occurs.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.