在无交换机 A300/FAS8200 到 A400/FAS8300 机头升级期间,无法将集群置于仲裁状态
适用场景
- FAS8200
- FAS8300
- AFF A300
- AFF A400
- 使用无中断聚合重新定位(Nondisruptive Aggregate Relocation、ARL)操作步骤 或移动存储中断操作步骤 将双节点无交换机集群从FAS8200升级到FAS8300或AFF A300到AFF A400
问题描述
- 在安装了第一个AFF A400/FAS 8300并将其连接到旧的AFF A300/FAS 8200节点(使用ARL操作步骤)或两个新节点均已就位(移动存储时使用中断操作步骤)后、无法将集群置于仲裁状态
- 对于ARL操作步骤 、此步骤对应 于加入仲裁时的步骤3
- 对于移动存储/中断操作步骤 、此步骤对应 于安装新节点后的最后一步
- 集群LIF保持脱机状态
- 节点报告集群应用程序未启动:
Cluster::> storage failover show
Takeover
Node Partner Possible State Description
-------------- -------------- -------- -------------------------------------
node-01 node-02 true Connected to node-02
node-02 node-01 true Connected to node-01.
Waiting for cluster applications to
come online on the local node.
Offline applications: vldb, vifmgr,
bcomd, crs, scsi blade, clam.
2 entries were displayed. - 尝试将集群广播域更新到新端口会导致错误:
Error: Cannot run this command because the system is not fully initialized. Wait a few minutes, and then try the command again.