跳转到主内容

由于AFF A250或FAS500f上的SP检测信号停止而导致系统关闭(BMC 15.4、15.5、15.5P1)

Views:
27
Visibility:
Public
Votes:
0
Category:
fas-systems<a>SP HBT已停止</a><a>SP HBT未命中</a><a>sp.ipmi.lost.shutdown</a>
Specialty:
hw
Last Updated:

适用场景

问题描述

  • 由于BMC 检测信号已停止、节点重新启动:
Sun Jun 13 21:45:49 +0100 [node-01: spmgrd: sp.heartbeat.stopped:error]: Have not received a IPMI heartbeat from the Service Processor (SP) in last 600 seconds.
Sun Jun 13 21:57:32 +0100 [node-01: spmgrd: sp.heartbeat.stopped:error]: Have not received a IPMI heartbeat from the Service Processor (SP) in last 600 seconds.
Sun Jun 13 21:57:32 +0100 [node-01: spmgrd: callhome.sp.hbt.missed:notice]: Call home for SP HBT MISSED
Sun Jun 13 22:09:09 +0100 [node-01: spmgrd: callhome.sp.hbt.stopped:alert]: Call home for SP HBT STOPPED
Sun Jun 13 22:12:16 +0100 [node-01: env_mgr: sp.ipmi.lost.shutdown:EMERGENCY]: SP heartbeat stopped and cannot be recovered. To prevent hardware damage and data loss, the system will shut down in 10 minutes.
Sun Jun 13 22:22:16 +0100 [node-01: env_mgr: monitor.shutdown.emergency:EMERGENCY]: Emergency shutdown: Environmental Reason Shutdown (System reboot to recover the BMC)
  • 由于重新启动、配对节点将执行接管

[Node-02: cf_main: cf.fsm.takeover.on.reboot:info]: Failover monitor: One node initiated automatic takeover after detecting that its partner node is rebooting.

  • 在其他情况下、节点不会在事件期间记录任何内容、只有配对节点会显示:

Sat Jan 22 18:11:28 +0100 [node-A: cf_main: cf.fsm.takeover.noHeartbeat:alert]: Failover monitor: Takeover initiated after no heartbeat was detected from the partner node.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.