跳转到主内容

即使实际速度为 1 Gbps , SP 也错误地以 100 Mbps 的速度链接

Views:
24
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用于

  • 服务访问程序( SP )
  • FAS8300

问题

SP 速度显示 100mb ,而不是 1GB 。
 

示例: 

 NODE::> node run -node NODENAME sysconfig -a NetApp Release 9.7P3: Fri Apr 17 10:40:14 EDT 2020 System ID: xxxxxxxxxx (node1); partner ID: xxxxxxxxxx (node2) System Serial Number: xxxxxxxxxx (node1) System Rev: B1 System Storage Configuration: Multi-Path HA System ACP Connectivity: Inband Active All-Flash Optimized: false Capacity Optimized: false All SAN Array: false Backplane Part Number: 111-04200 Backplane Rev: B0 Backplane Serial Number: xxxxxxxxxx ... Service Processor Status: Online Firmware Version: 13.2 Mgmt MAC Address: xx:xx:xx:xx:xx:xx Ethernet Link: up, 100Mbps <<<<<<< 1Gbps is normal Using DHCP: no 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.