跳转到主内容

删除集群交换机后出现 SNMP 错误 SwitchCommunityString_Alert

Views:
5
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core<a>2009086847</a>
Last Updated:

适用场景

  • ONTAP 9
  • 集群网络交换机

问题描述

  • 删除集群交换机以转换为无交换机集群后、将显示有关交换机配置错误的警报:
  • 在更换、升级或更改集群交换机上的IP配置后、也可能会出现此错误
::>system health alert show
    Node: cluster1n1
    Resource: cluster1-sw01
    Severity: Major
    Indication Time: Mon Mar 14 15:25:48 2022
    Suppress: false
    Acknowledge: false
    Probable Cause: Ethernet switch "cluster1-sw01" with IP address "192.168.1.5" is not reachable via SNMP.Incorrect SNMP community string might be configured on the Ethernet switch. Possible Effect: Ethernet switch communication problems and accessibility issues.
    Corrective Actions: Check the SNMP community string on Ethernet switch to verify that the expected community string is configured. Use the "system switch ethernet show -snmp-config" command to view the expected community string

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device