跳转到主内容

RCF后更新端口X在BES-53248上没有服务协议

Views:
8
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
brocade<a>2009-309397</a>
Last Updated:

适用场景

  • BES — 53248
  • RCF

问题描述

  • 在BES-53248上、服务协议不会应用于RCF升级后的端口
  • 没有服务协议的示例
    interface 0/49 no shutdown description "40/100GbE Node Port" speed 100G full-duplex spanning-tree edgeport mtu 9216 switchport mode trunk switchport trunk allowed vlan 1,17-18 datacenter-bridging priority-flow-control mode on priority-flow-control priority 2 no-drop priority-flow-control priority 5 no-drop
  • 正确的示例
    interface 0/49 no shutdown service-policy in CLUSTER description "40/100GbE Node Port" speed 100G full-duplex spanning-tree edgeport mtu 9216 switchport mode trunk switchport trunk allowed vlan 1,17-18 datacenter-bridging priority-flow-control mode on priority-flow-control priority 2 no-drop priority-flow-control priority 5 no-drop

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.