跳转到主内容

插槽11中的NVDIMM失败、并在节点启动时显示错误nvdimm.nvmem.initfault:FAULT"

Views:
8
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2009年362148</a>
Specialty:
hw
Last Updated:

适用场景

  • AFF A400
  • AFF A800
  • FAS 8300
  • FAS 8700
  • ONTAP 9

问题描述

节点无法启动、并显示以下错误:在ONTAP 升级过程中重新启动节点后、出现崩溃
 
[nvdimm.nvmem.initfail:FAULT]:NVMEM subsystem initialization failed because NVDIMM device in slot-11   
failed to configure energy source

**********************************************************************
NVMEM subsystem failed initialization or configuration check To prevent NVMEM data loss, halt the system.
Set bootarg.init.battery_override can ignore this error and continue to boot.
**********************************************************************

PANIC : System is going to shutdown because NVMEM subsystem failed initialization or configuration check.
version: 9.10.1P4: Mon May 9 18:11:44 EDT 2022

IPMI device unit 1 rev. 1, firmware rev. 10.03, version 2.0, device support mask oxbf

Sun Mar 5 08:05:02 2023 [nvdimm.nvmem.initfail:FAULT]:NVMEM subsystem initialization failed because NVDIMM device in slot-11 lost persistence due to SDRAM not in self-refresh mode , andNVDIMM HARDWARE error.. To prevent NVMEM data loss, halt the system.
Sun Mar 5 08:05:02 2023 [nvdimm.nvmem.initfail:FAULT]:NVMEM subsystem initialization failed because NVDIMM device in slot-23 lost persistence due to SDRAM not in self-refresh mode , andNVDIMM HARDWARE error.. To prevent NVMEM data loss, halt the system.
Sun Mar 5 08:05:02 2023 [nvdimm.nvmem.destage.failure:ALERT]:NVMEM subsystem failed to copy nonvolatile data to flash memory on NVDIMM device because SDRAM is not in self-refresh mode, and because of a hardware error..

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.