NS224 磁盘架未显示多路径且布线正确

最后更新
另存为PDF

Views:: 30

Visibility:: Public

Votes:: 0

Category:: aff-series

Specialty:: hw

Last Updated:

适用场景

AFF A800
AFF A400
NS224
X1148A

问题描述

AFF A400 和 NS224 磁盘架已按照文档正确布线（请参见追加信息），但在使用 X1148A 适配器时未显示为 MPHA ：

sysconfig -a

存储配置

 NetApp Release 9.7P6: Tue Jul 28 00:08:29 EDT 2020 System ID: 0538144493 (netapp-aff400-1); partner ID: 0538143738 (netapp-aff400-2) System Serial Number: 722016000198 (netapp-aff400-1) System Rev: B1 System Storage Configuration: Single-Path HA

端口已联机

You can see the e5a/e5b ports on the X1148A linked up, but cannot see the disks behind them:

 slot 5: 40G/100G Ethernet Controller CX5 e5a MAC Address: xx:xx:xx:xx:xx:xx (auto-100g_cr4-fd-up) e5b MAC Address: xx:xx:xx:xx:xx:xx (auto-100g_cr4-fd-up) Device Type: CX5 PSID(NAP0000001002) Firmware Version: 16.25.1020 Part Number: MCX516A-CCAT_C21 Hardware Revision: A2 Serial Number: MT1111111111

storage port show

验证 HA 对中的非专用端口是否已配置为用于存储。 storage port show

ONTAP 9.6 和 9.7

如果 HA 对运行的是 ONTAP 9.6 或 9.7 ，则中显示的非专用端口 false 是专用端口？列，也会 disabled 显示在状态列中。

::> storage port show -node node1 -port-type ENET

                              Speed                            VLAN Is

Node Port Type (Gb/s) State Status ID Dedicated?

------------------ ---- ----- ------ --------------- --------- ---- ----------

node1

e5a ENET 100 disabled online - false

e5b ENET 100 disabled online - false

2 entries were displayed.

ONTAP 9.8

如果 HA 对运行的是 ONTAP 9.8 或更高版本，则非专用端口会显示 network 在模式列中。

:*> storage port show -node node1 -port-type ENET Speed VLAN Node Port Type Mode (Gb/s) State Status ID ------------------ ---- ----- ------- ------ -------- --------- ---- node1 e5b ENET network 100 enabled online - e5c ENET network 100 enabled online - 2 entries were displayed.