MetroCluster configuration-settings connection connect命令返回错误
适用场景
MetroCluster IP
问题描述
metrocluster configuration-settings connection connect
命令返回错误
Errors: Did not receive a "ping" response using the network addresses "xx.xx.xx.1" and "xx.xx.xx.2" on node "clusterA-01" in cluster "clusterA".
- 端口状态为
UP
clusterA::> metrocluster interconnect adapter show
Adapter Link
Node Adapter Name Type Status IP Address Port Number
------------ --------------- ------- ------ ----------- -----------
clusterA-01 adapter0 iWARP UP xx.xx.xx.1 e5b-10
clusterA-01 adapter1 iWARP UP xx.xx.yy.1 e7b-20
clusterA-02 adapter0 iWARP UP xx.xx.xx.2 e5b-10
clusterA-02 adapter1 iWARP UP xx.xx.yy.2 e7b-20
4 entries were displayed.
Network address
和Netmusk
设置正确
clusterA::> metrocluster configuration-settings interface show
DR Config
Group Cluster Node Network Address Netmask Gateway State
----- ------- ------- --------------- --------------- --------------- ---------
1 clusterA clusterA-01
Home Port: e5b-10
xx.xx.xx.1 255.255.255.0 - completed
Home Port: e7b-20
xx.xx.yy.1 255.255.255.0 - completed
clusterA-02
Home Port: e5b-10
xx.xx.xx.2 255.255.255.0 - completed
Home Port: e7b-20
xx.xx.yy.2 255.255.255.0 - completed
clusterB clusterB-01
Home Port: e5b-10
xx.xx.xx.3 255.255.255.0 - completed
Home Port: e7b-20
xx.xx.yy.3 255.255.255.0 - completed
clusterB-02
Home Port: e5b-10
xx.xx.xx.4 255.255.255.0 - completed
Home Port: e7b-20
xx.xx.yy.4 255.255.255.0 - completed
8 entries were displayed.
show-status
将为所有连接返回错误
clusterA::> metrocluster configuration-settings show-status
Cluster Node Configuration Settings Status
-------------------------- ------------------ ---------------------------------
clusterA
clusterA-01 connection error
Error: Did not receive a "ping" response using the network
addresses "xx.xx.xx.1" and "xx.xx.xx.2" on node "clusterA-01" in
cluster "clusterA".
clusterA-02 connection error
Error: Did not receive a "ping" response using the network
addresses "xx.xx.xx.2" and "xx.xx.xx.1" on node "clusterA-02" in
cluster "clusterA".
clusterB
clusterB-01 connection error
Error: Did not receive a "ping" response using the network
addresses "xx.xx.xx.3" and "xx.xx.xx.4" on node "clusterB-01" in
cluster "clusterB".
clusterB-02 connection error
Error: Did not receive a "ping" response using the network
addresses "xx.xx.xx.4" and "xx.xx.xx.3" on node "clusterB-02" in
cluster "clusterB".
4 entries were displayed.
- 已成功通过存储系统Shell在iWARP端口之间执行直接Ping测试