Health Monitor 警报 SPNotConfigureAlert

适用于

• FAS
• 全部闪存 FAS (AFF)

问题

• AutoSupport （ ASUP ）报告 SPNotConfigureAlert
• system health alert show 命令 show spnotConfigureAlert

示例：

            Node: cluster-01
          Monitor: controller
          Alert ID: SPNotConfiguredAlert
     Alerting Resource: SP Config
         Subsystem: Service-Processor
      Indication Time: Wed Apr 24 14:42:27 2019
     Perceived Severity: Major
       Probable Cause: Configuration_error
        Description: Service Processor is not properly configured.
     Corrective Actions: 1. Use the "system service-processor network modify" command to configure the network interface                             of the Service Processor. 
                            2. Use the "system service-processor image modify -node cluster-01 -autoupdate true" to                             configure AutoUpdate feature of the Service Processor.
                            3. Contact the technical support if the alert persists.
      Possible Effect: You might not be able to use the Service Processor to remotely access, monitor, and troubleshoot                             your storage system.
        Acknowledge: false
          Suppress: false
           Policy: SPNotConfiguredAlertPolicy
        Acknowledger: -
         Suppressor: -
   Additional Information: Status: online
               Configured: false
               Firmware Version: 5.5P1
               Booted Version :  primary
               Public Link Status:  down
               Warning Count: 7
               Link Warning Count: 8
   Alerting Resource Name: SP Config
   Additional Alert Tags: device

            Node: cluster-02
          Monitor: controller
          Alert ID: SPNotConfiguredAlert
     Alerting Resource: SP Config
         Subsystem: Service-Processor
      Indication Time: Wed Apr 24 14:49:17 2019
     Perceived Severity: Major
       Probable Cause: Configuration_error
        Description: Service Processor is not properly configured.
     Corrective Actions: 1. Use the "system service-processor network modify" command to configure the network interface                             of the Service Processor. 
                            2. Use the "system service-processor image modify -node cluster-02 -autoupdate true" to                             configure AutoUpdate feature of the Service Processor.
                            3. Contact the technical support if the alert persists.
      Possible Effect: You might not be able to use the Service Processor to remotely access, monitor, and troubleshoot                             your storage system.
        Acknowledge: false
          Suppress: false
           Policy: SPNotConfiguredAlertPolicy
        Acknowledger: -                          
         Suppressor: -
   Additional Information: Status: online
               Configured: false
               Firmware Version: 5.5P1
               Booted Version :  primary
               Public Link Status:  down
               Warning Count: 9
               Link Warning Count: 10
   Alerting Resource Name: SP Config
   Additional Alert Tags: device