跳转到主内容

故障 LED 在仅含内部存储的 FAS22xx 或 FAS25xx HA 存储系统上无明显原因亮起

Views:
89
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

状态信息

适用于

 

  • 平台: FAS2220 , FAS2240-2 , FAS2240-4 , FAS2520 , FAS2552 , FAS2554 , FAS2620 , FAS2650 , FAS2720 , FAS2750 , AFF-A200 和 AFF-A220
  • 高可用性配置(机箱中插入了 2 个处理器控制模块( PCM )并配置为进行 HA 操作)
  • 仅限内部存储(未连接外部 SAS 存储架)
  • PCMS 上的 0A 或 0B SAS 端口直接连接到其他 PCM 上的 SAS 端口

问题

如果发现以下任何症状,则本文适用。
  1. EMS 事件:当 PCM A 上的端口 0B 直接连接到 PCM B 上的端口 0B 时,您偶尔会在事件日志中看到此 EMS 事件: config.invalid.porttoport
示例:
 Fri Dec 09 14:30:00 PST [node1: pmcsas_intrd_0: config.invalid.PortToPort:error]: SAS adapter "0b" is attached to another SAS adapter. 
  1. 环境:其中一个节点运行环境机架 Nodeshell 命令。内部架 [2] 和 [4] SAS 扩展器端口上列出的 SAS 电缆序列号相同。扩展器端口 [2] PCM A 上的 0 A 端口、端口 [4] PCM B 上的 0 A 端口 
 SAS cable information by element: [1] Internal connector [2] Vendor: Amphenol Type: QSFP passive copper 0.5-1.0m ID: 01 Swaps: 0 Serial number: APF14131767EE1 Part number: 112-00176+A0 [3] Internal connector [4] Vendor: Amphenol Type: QSFP passive copper 0.5-1.0m ID: 00 Swaps: 0 Serial number: APF14131767EE1 Part number: 112-00176+A0 
  1. sysconfig -a :个节点运行 sysconfig -a nodeshell 命令。以下情况得到了观察:
  • 系统存储配置:单路径 HA
  • 两个节点上的 SAS 0B 端口显示相同的 QSFP 序列号。
 
PCM A
 slot 0: SAS Host Adapter 0b (PMC-Sierra PM8001 rev. C, SAS, <UP>) Firmware rev: 01.11.06.00 Base WWN: 5:00a098:00361ff:74 Phy State: [4] Enabled, 6.0 Gb/s [5] Enabled, 6.0 Gb/s [6] Enabled, 6.0 Gb/s [7] Enabled, 6.0 Gb/s QSFP Vendor: Amphenol QSFP Part Number: 112-00176+A0 QSFP Type: Passive Copper 0.5m ID:01 QSFP Serial Number: APF14131767EDC
 
PCM B
 slot 0: SAS Host Adapter 0b (PMC-Sierra PM8001 rev. C, SAS, <UP>) Firmware rev: 01.11.06.00 Base WWN: 5:00a098:0035e3d:b4 Phy State: [4] Enabled, 6.0 Gb/s [5] Enabled, 6.0 Gb/s [6] Enabled, 6.0 Gb/s [7] Enabled, 6.0 Gb/s QSFP Vendor: Amphenol QSFP Part Number: 112-00176+A0 QSFP Type: Passive Copper 0.5m ID:00 QSFP Serial Number: APF14131767EDC
 
  1. sas-expander-map :其中一个节点运行 sasstat expander_map nodeshell 命令。输出在通道 0A 上仅包含一个条目。
 Expanders on channel 0a: Level 1: WWN 500a098003xxxxxx, ID 0, Serial Number ' SHFFG1416xxxxxx', Product 'DS212IOM6E ', Rev '0142', Slot A Expanders on channel 0b: 

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.