跳转到主内容

在高延迟系统操作期间重复出现 FCP wqe 错误

Views:
8
Visibility:
Public
Votes:
0
Category:
fas-systems<a>FCP</a><a>wqe 故障</a><a>2008860203</a>
Specialty:
san
Last Updated:

适用场景

  • ONTAP 9.x
  • Emulex LPe32000 FCP 目标端口

问题描述

scsitarget.slifct.wqeErrorfcp.io.status 从Emulex FCP目标端口(Emulex LPe32000 (LPe32002) Rev.重复此操作12)在高延迟系统运行期间。
 
 
示例:
 
7/23/2021 04:05:48  FAS-01  DEBUG scsitarget.slifct.wqeError: FC port 10a has a WQE processing failure of type SLI_IO_ABORT, command N/A, subtype x0, with status of 3 and an extended status x5 for NPIV port 3.
 
7/23/2021 04:05:48  FAS-01  DEBUG fcp.io.status: STIO Adapter:10a IO WQE failure, Handle 0x6, S_ID: C70160, OX_ID: F56, Status 0x3 Ext_Status 0x5
 
7/23/2021 04:05:49  FAS-01  ERROR wafl.cp.toolong: Aggregate aggr1 experienced a long CP.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.