跳转到主内容

FCP适配器初始化失败—AutoSupport 消息

Views:
2
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

适用场景

  • ONTAP 9
  • callhome.fcp.adapter.failed:错误

事件摘要

如果此节点中的光纤通道协议(Fibre Channel Protocol、FCP) HBA主机总线适配器(Host Bus Adapter、HBA)无法从适配器的内部配置中读取关键设置、则会出现此消息。应更换适配器。

验证

主叫事件
HA Group Notification from Node Name (FCP ADAPTER INITIALIZATION FAILED, Port: 0) ERROR
EMS日志

::>event log show -severity * -message-name callhome*

Fri Jan 29 14:13:46 +0100 [Node Name: sysinit_thread: callhome.fcp.adapter.failed:error]: Call home for FCP ADAPTER INITIALIZATION FAILED, Port: 0

命令行

::>system node run -node <node name> -command sysconfig 

slot 0: Fibre Channel Target Host Adapter 0d (QLogic CNA 8324 (8362) rev. 2, <LINK NOT CONNECTED>) Firmware rev: 8.9.0 Flash rev: 7.0.3 Host Port Addr: 000000 FC Nodename: 50:0a:xx:xx:xx:xx:xx:xx (500axxxxxxxxxxxx) FC Portname: 50:0a:xx:xx:xx:xx:xx:xx (500axxxxxxxxxxxx) Connection: No link Switch Port: Unknown SFP Vendor Name: AVAGO SFP Vendor P/N: AFBR-709SMZ-NA1 SFP Vendor Rev: G4.1 SFP Serial No.: XXXXXXXXXX SFP Connector: LC SFP Capabilities: 10 Gbit/Sec

解决方法

  • 请联系NetApp技术支持并参考此文章以获得进一步帮助。解决方案 可能需要更换部件。

追加信息

在此处添加您的文本。

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.